In wet ceramic tile surfaces prior to coating the preparation is very important. Vertical surfaces, solid and smooth surface, there is a need for an absolute way to obtain excellent adhesion. This plaster with cement lime DOSER joining 400 prepared plaster. This plaster must be in every point in the infinitive. Rude waterproofing compounds is very good in terms of adhesion release will give you the results. In order to prevent cracking of the plaster, more even-strength Allmax into Latex, Bonding off wall Enhancer can participate in the Mortar and Additive. Vertical surfaces, underlay much experimentation that we have done for horizontal surfaces s properly the spanking.

Another issue is to know in wet insulation against water. Because ceramic tiles are all by themselves will not be able to show an insulation against water. Although the back of the front surface of ceramic tiles surfaces of waterproofing wet areas such as bathrooms, although especially waters can enter under the coating. Entering point is usually the point where ground water from creeks or wall switch.

They have a few small details left to do to make sure this doesn t happen. These are at the beginning of isolation. Insulation for cement-based waterproofing mortar or acrylic sealing mortars can be used. Application of brush or rolls of these products as well as through the flat part of the comb trowel 1-2 mm thickness can be applied to the surface in the shape to be created. At this point, the most important issue to be considered, where the wall point especially during floor insulation file supplement. Here at the junction of the two walls as vertically still needs to be done with the file supplement will give very good results the isolation. The use of insulation materials and driving patterns, it is necessary to note.

Another issue is joint. There s water in wet, prevent weathering and as it is known in places where mold too. Therefore we will use in wet, mold and algae within normal standard gap when.

To avoid this, do not make a mold resistant fungs, cracking, smooth surface that can create a silicone based Alfuga Ultra silicone Grouting Material using such products will give you much better results.