The terrace and balconies is constantly outdoors exposed to atmospheric influences. Rain, snow, cold, hot, corrosive effects on wind-exposed ceramic tiles laying the right ingredients with the right techniques. Which will constitute the top tier ceramic tile adhesives, absolute way when coating application techniques using high-performance adhesives are required.

Resistant to both heat and water-resistant conversion and frost-resistant, this can be done only with long lasting adhesive coatings.

Grouting materials is both water resistant and resistant to heat and cold.

Coating will be used as the standard tooth measures will surely way big must be selected.  Application should be made in the method of combined, so the adhesive mortar should be applied and kept both surface comb and ceramic tile should be applied and kept the rear surface of the comb.

Mortar bed placed tile will surely way before printing by hand, it should be installed at a later time, rather than by applying the plastic with a good-sized plastic with a very good tokmaklanarak.

Coating will be dropped at the size of the width of the ceramic tile grouts and to be resistant to thermal conversion must be selected.

Especially in the wide terrace footprint expansion joints should be also. Expansion joints can be filled with such nomination with sealant.

Will constitute the gold overlay is strong enough and should be made a smooth incline enough screed. This material is very important for the water to the bottom of the entry. Water goes into the slope should be set very well. Especially on the terraces and balconies with don patlağ. The main reason for this is that water is entering the bottom of the coating and cold weather.

Therefore, the coating should be absolute water under the entry way. The easiest and best way to avoid this, take very good filling of joints, use of a water resistant material and coating the absolute way through pass to be combined. It is insulated with don patlağ if done.