SMOOTH SURFACE PRIMER
Product Description:
It is an acrylic polymer dispersion based, one component, ready-to-use, smooth surface primer with high adhesion power.
Public Works Pos No: 04.466/3
Areas of Use:
Smooth and shiny surfaces such as ceramic, marble, granite, plywood,
Solid painted surfaces (acrylic or alkyd based),
It is also used as a primer on absorbent surfaces such as gypsum, concrete, plaster, screed and wood.
Features:
It increases the adhesion strength by creating a rough surface for bonding ceramic on smooth and shiny floors.
It provides better adhesion of the ceramic adhesive to the surface by ensuring that the dusted parts on the surfaces adhere to the surface.
It is ready to use. It can be applied with a brush or roller.
It does not smell as it does not contain solvent and is diluted with water.
It does not harm human and environmental health.
Technical Specifications:
Appearance: Light blue liquid
Density: ~ 1.50 kg / liter
Application Temperature: + 5ºC to + 35ºC
Drying Time: 45-60 minutes
The above values are given for +23 ºC and 50% relative humidity.
Pre-Application Preparation:
Care should be taken to ensure that the surface is cured and solid.
Plaster, paint, glue, oil, cement residues on the surface should be completely removed.
The surface should be clean, dry, smooth and sound.
Application:
After the product is thoroughly mixed, it is applied with a brush or roller. Any contribution should not be added.
It is applied to the entire surface with a brush or roller in equal thickness.
It should be applied in 2 layers on very absorbent surfaces such as plaster, screed or concrete.
Drying time is approximately 60 minutes. Do not apply on it before it dries.
Warnings:
The temperature of the application surface should be minimum + 5 ° C and the surface should not receive precipitation.
In order to protect the surface adherence to be provided by Primerfix 101, care should be taken not to get dirty during the application.
Avoid application in areas that are constantly wet and under water.
Hands and application tools should be washed with plenty of water after application.
Consumption: 100-250 gr/m² (For one floor)
It varies depending on the application surface.
Packing: 1 kg. and 3.5 kg. plastic bucket
Storage and Shelf Life:
Protect the liquid component from exposure to sunlight and frost between + 5ºC and + 35ºC.
Shelf life is 12 months in its original packaging in a suitable environment.
Safety Advices:
For more detailed information, please refer to the Safety Data Sheet.
Responsibility:
The application instructions and technical values given in this technical document are based entirely on our scientific and practical knowledge. These values may vary depending on the ambient conditions. Allmax Construction Chemicals reserves the right to make changes in products in line with technological developments. Allmax Yapı Kimyasalları cannot be held responsible for the results that may arise out of written recommendations regarding where and how the product will be used and / or due to incorrect use. Therefore, when using Allmax Construction Chemicals products, make sure that you use the right product in the right place. Allmax Construction Chemicals is only responsible for the quality of the product.
