ELASTOMERIC RESIN BASED, UV RESISTENT, FULL ELASTIC WATERPROOF MATERIAL
Product Description:
Elastomeric (acrylic) resin based, single component, uv resistant, ready-to-use, fully elastic waterproofing material.
It is suitable for TS EN 1504-2 (C) I MC-IR principles.
Public Works Pos No: 04.509
Areas of Use:
Indoor and outdoor,
In vertical and horizontal applications,
On flat and inclined roofs,
On the sides of the chimney,
Metal, wood, polyester, corrugated roofs,
In wet areas such as bathrooms, kitchens,
On terraces and balconies,
In the waterproofing of galvanized sheet metal, zinc and PVC eaves, gutters and strainers,
In concrete, zinc and precast streams,
It is used for insulation of exterior facades of buildings against moisture.
Features:
It is ready to use.
It is applied easily and quickly.
It can be applied by brush, roller or spraying method.
It does not create joints.
It is not affected by sunlight, it is UV resistant.
Thanks to its fully elastic structure, it maintains its elasticity even at low temperatures.
Provides high adherence.
It is resistant to freezing-thawing cycle.
Can be painted with acrylic-based paints.
It can be produced in desired colors upon order.
It does not prevent the surface from breathing.
Does not contain solvent.
Technical Specifications:
Structure of the Material: Styrene / Acrylic copolymer based
Appearance: White
Density: 1.35-1.40 kg / liter
Elasticity: Very good
Application Temperature: + 5ºC to + 30ºC
Service Temperature: -20 C to + 120 C
Waiting Time Between Coats: 5-6 hours
The above values are given for +23 ºC and 50% relative humidity.
Pre-Application Preparation:
Take care of that the application surface is cured and solid. The surface to be applied should be free from paint, oil, dust, etc. must be cleaned from materials. Plasters that do not adhere well on the application surface should be removed, and any defects should be corrected with Tamires repair mortars.
Application:
Sumax UV Q5 should be applied to the surface with a brush or roller. As a primer by mixing with 20% water in the first layer and then each layer is approximately 1.0 - 1.5 mm. It should be applied in a way that creates a film thickness. Depending on the weather conditions, it dries in approximately 4 - 6 hours. The other coat should not be applied before one coat is completely dry. Reinforce it with carriers such as felt and net against water pressure.
Sumax UV Q5 is produced in white color. It can be colored with a paste pigment not exceeding 5% of the material amount.
Warnings:
Avoid application at temperatures below + 5 ° C and above + 30 ° C.
Avoid application in frozen areas, where there is a risk of freezing within 24 hours or in areas open to direct sunlight and wind.
The applied material should be protected from rain and frost for the first 24 hours.
Sumax UV Q5 is not suitable for water tanks, swimming pools and foundation insulation under continuous water pressure.
It should not be applied on wet and damp floors.
In applications, each layer thickness should not exceed 1.0-1.5 mm.
Sumax UV Q5 gains mechanical strength after 5 days and becomes waterproof after 7 days. It reaches final strength after 14 days.
Measures should be taken on surfaces that need to be walked on. It should be reinforced with a suitable net.
Attention should be paid to the drying time between coats.
Keep the lid closed when the product application is finished or paused.
Consumption:
1.4-1.6 kg / m² (for 1 mm thickness)
3-4 kg / m² (on terrace roofs)
2-4 kg / m² (in creeks)
The amount of consumption is the values calculated theoretically in the laboratory environment; We recommend that consumption control sample application be made before the application.
Packing:
5 kg plastic bucket
20 kg plastic bucket
Storage and Shelf Life:
It should be stored in its unopened original package, in a cool and dry environment, protected from frost.
It is 12 months from the date of production under suitable storage conditions.
Opened packages should be stored under appropriate storage conditions and used within one week.
Safety Advices:
For more detailed information, please refer to the Safety Data Sheet.
Responsibility:
The application instructions and technical values given in this technical document are based entirely on our scientific and practical knowledge. These values may vary depending on the ambient conditions. Allmax Construction Chemicals reserves the right to make changes in products in line with technological developments. Allmax Yapı Kimyasalları cannot be held responsible for the results that may arise out of written recommendations regarding where and how the product will be used and / or due to incorrect use. Therefore, when using Allmax Construction Chemicals products, make sure that you use the right product in the right place. Allmax Construction Chemicals is only responsible for the quality of the product.
